If opened, paint is non-returnable/non-refundable
? 3MTM Automotive Acrylic Plus Attachment Tape 06395 is a .060-inch thick, medium-density, black acrylic foam tape with high performance acrylic adhesives on both sides and a red release liner.
? 3M TM Automotive Acrylic Plus Attachment Tape 06395 uses OEM (Original Equipment Manufacturer) approved acrylic foam core and adhesive technology and is designed for more demanding applications. 06395 is characterized by good peel and shear adhesion to most automotive surfaces, with good internal strength and high conformability. Application uses are attachment of rocker panel moldings.
 Rocks, By Phil Burns (Montevallo, Alabama USA) - See all my reviews This review is from: 3M Company Automotive Acrylic Plus Attachment Tape, 7/8 in x 10 yd, 60 mil (Misc.) This stuff rocks. It will stick anything to an auto. I used it to re-do the molding on an 88 woody and wow it works better than the factory stuff. 3M - quality product. |
3M 233+ FEATURES and BENEFITS: Highly conformable, Provides the best adhesive transfer resistance; Hugs curves, contours and provides outstanding paint lines, Goes on quickly and easily, sticks at a touch and stays put, Perfectly balanced to give outstanding masking results, Consistently performs under a variety of climatic conditions,Controlled, consistent unwind; Resistant to bleed through, Has better UV resistance than traditional masking tapes. Adhesion to steel: 38oz./in.width. Tensile: 25lbs/in. Tape thickness: 6.7 mils. Temp range: 250F(121C) for 30 minutes
| Great Stuff! Safe on Lacquer, By Cosmic11do2 "Cosmic11do2" (Mtn. Time) - See all my reviews Amazon Verified Purchase This review is from: 3M 3/4" 233+ GREEN AUTO MASKING TAPE-12 Rolls-PAINT CAR I am using this in stringed instrument construction. It is wonderful in that it has just a bit of stretch and can be used for glue up of wood strips by stretching in place. It holds well and does not leave any residue behind even after a week or two. I have used it over lacquer and it doesn't leave any imprint. NOTE: Do NOT use it over fresh lacquer, less than a week old, for any length of time or it WILL imprint. For a quick mask and spray and remove it is fine. But overnight might imprint or really fresh lacquer.Very strongly recommended! |
The Elcometer 311 has been specifically designed to meet the requirements of today's automotive market.
Ideal for newer, highline automobiles.
Pre-calibrated on steel and aluminium car body panels, the Elcometer 311 is very easy-to-use. Checkpieces are supplied with each instrument to verify its performance.
How Can I Tell Which Gauge Type Is Right for Me?
In selecting the most appropriate gauge for your application, you need to answer a few specific questions.
1. What is the substrate (the surface metal) you are coating/inspecting?
Is the metal a Ferrous Substrate (F) or a Non-Ferrous (NF)? Sometimes this is difficult to answer - the substrate may have already been coated. The easiest way to identify this is to see if a magnet will stick to the surface. If it does, the substrate will be Ferrous, if it does not, the substrate is NonFerrous.
2. Is this the only substrate you measure on?
If you only inspect one type of product, then the answer is yes. If you have a range of products that you inspect, then you need to consider whether they are all the same type of substrate. You should also consider if you have a future possibility of inspecting other substrates. If so, you should consider an FNF gauge.
