List Price : Price : $60.35
Product Description
ISC Helicopter-OG-HD Heavy Duty Surface Guard Tape (14 mil Outdoor Grade) is an extremely tough conformable polyurethane tape which was formerly referred to as helicopter/leading edge wing tape. It provides excellent paint protection from punctures, tearing, abrasion and erosion and is available in an indoor grade or an outdoor grade. Indoor grade can be used anywhere it will not be directly exposed to ultra violet light (the sun). If exposed to sun light, it may yellow over time. Outdoor grade provides excellent protection against ultra violet light, temperature extremes and automotive solvents. Outdoor grade will not yellow over time. The tape is clear/transparent and is supplied on a white paper release liner. Be sure to take note that ISC Surface Guard Tape is made of Polyurethane material not PVC or Vinyl. These other types cannot, and will not, take the abuse that Polyurethane will. Applications for the surface protection tape are endless and include: bicycle frames, skis, body panels on race cars, ground effects, top fuel wings, bumpers, tailgates, trailer walls, Sprint car wings, roll cages, toolboxes, headlights, wheel wells, truck beds, and door and hood edges. Also used to protect bar code labels under extreme conditions like at ski resorts. Anywhere there is a surface, unpainted or painted, that is prone to scratching, chipping or weathering, ISC's Surface Guard Tape can do the job. Super tough film requires razor knife or scissors for cutting. Supplied on 92 lb. easy release polycoated liner. Requires no heat or solvent to activate. This product was mentioned in the October 2008 issue of Motorcycle Consumer News (page 48 Product Report).
- Adhesive: acrylic
- Backing/Carrier: polyurethane film
- Release Liner: 92 lb. polycoated white liner
- Thickness: 19.2 mils (including liner) 14.5 mils (without liner) 12 mils (carrier/backing)
- Adhesion: 110 ounces per inch (to stainless steel)
ISC Helicopter-OG-HD Surface Guard Tape: 3 in. x 30 ft. (Transparent) Reviews
ISC Helicopter-OG-HD Surface Guard Tape: 3 in. x 30 ft. (Transparent) Reviews
 Fantastic for carbon bike frame protection, Amazon Verified Purchase This review is from: ISC Helicopter-OG-HD Surface Guard Tape: 2 in. x 30 ft. (Transparent) I used this tape to protect the leading edges of all of my triathlon bike surfaces. It is easily conformable and any little air bubbles are easily squeezed out with a plastic bondo spreading tool. The best part is that it is strong enough to reposition if you get off your line. Highly recommended for this type of application especially since it is non yellowing Happy Customer, Amazon Verified Purchase This review is from: ISC Helicopter-OG-HD Surface Guard Tape: 1 in. x 30 ft. (Transparent) Great product. I've already gone through an entire roll. I used it to protect my mountain bike from rock chips and cable rub. You have to be patient with the application. I didn't use soapy water like some others. I just fitted it to the area I wanted to protect, then cut to length, then applied slowly by removing the paper backing as I went. Make sure you don't contaminate the adhesive with dirty fingers or anything else, and make sure you get all the air bubbles out of it will not stick as well. Helicopter Tape for Graphite Golf Shaft Protection, By Bradford Ritter (Fort Collins, CO United States) - See all my reviews Amazon Verified Purchase This review is from: ISC Helicopter-OG-HD Surface Guard Tape: 1 in. x 30 ft. (Transparent) I purchased Helicopter Tape (1") to protect my graphite shafted golf clubs from "bag wear". It is very easy to attach, stays in place and was easy to remove from the 1 club I put it on wrong. Only time will tell but the prognosis looks good. |
› See all 3 customer reviews...
ไม่มีความคิดเห็น:
แสดงความคิดเห็น